CAVEAT EMPTOR: on the 7/16" wide band these are stamped Wittek Mfg Co, Chicago USA and 1 1/4 and they are made in the USA; not reproduction; not imported. Photo may show multiple pieces however the unit of sale is one clamp. Using the GM part number consult your AIM for the proper quantity required for your model. 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982

CAUTION: Commonly termed Tower Clamps, the tower does not form until the screw is tightened. Use pliers to hold the captured nut at the base of the screw while tightening the screw. We recommend they should be tightened slowly in this manner. Never use an air powered wrench. No warranty for fractured clamps.

SMOG CLAMP IDENTIFICATION: all Corvette smog clamps were Wittek GN Series clamps that have a 7/16" wide band. Phony repro's are Wittek GM Series clamps with a 1/2" wide band. THE GM does not refer to General Motors. Most all repro Wittek tower clamps have the wrong size saddle just below the screw. Larger tower clamps use large saddles; smaller tower clamps use smaller saddles. The consequence of the wrong sized saddle is this makes the band form an asymmetrical oval instead of being round. Over tightening the oval to prevent leaks is a problem & clamps are often broken. Once you see that asymmetry, you know its a repro.